
Key Operator Mode
ECM (Electronic Copy Monitor) Function Setting [4] (continued)
E.C.M. Function Setting [3]
Use this function to turn ECM On or Off; or to select whether the copier will stop at the time the count limit is reached, or after the current copy job is completed.
ECM Setting Menu Screen | ECM Function Setting Screen |
1Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter a
2Touch [4] E.C.M. function setting. The ECM Master Key Code Screen displays, if a code is required.
3Enter your
4Touch [3] E.C.M. function setting. The ECM Function Setting Screen will be displayed.
5Touch ECM On to activate ECM or touch ECM Off to
6Touch Immediately to stop the machine when the copy limit is reached.
In this case, the paper in process will be completed, and “Enter ECM password” will display after the copier stops.
Touch After job to stop the machine after the current job is completed, when copy limit is reached.
Touch Warning only to display a warning message when copy limit is reached. The selected key will be highlighted.
7Touch OK to complete the setting and return to the ECM Setting Menu Screen.
8If other ECM setting changes are required, touch desired key, from [1]~[3].
9Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other key operator settings are required, select the desired menu item, from [1] to [18].
10 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.
NOTES:
1If an invalid Key operator password is entered, continue by entering the valid
2If an invalid ECM master key code is entered, continue by entering the valid