Key Operator Mode

User Setting Mode [3] (continued)

User Lens Mode Ratio Setting [3]

The preset and userset ratios available on the Basic Screen are used to reduce and enlarge the original image to accommodate copy paper size.

Normally, users are allowed to change the three USERSETs in the bottom line on the User Lens Mode Ratio Setting Screen. The preset keys in the top and middle lines can be programmed in 2-5 DIPSW mode for special purposes, but ordinarily, it is recommended that they remain unchanged.

Setting options: Userset or Preset ratio

Default setting: USERSET1: 4.00 USERSET2: 2.00 USERSET3: 0.50

User Setting Mode Menu Screen

User Lens Mode Ratio Setting Screen

1Press [HELP] to display the Help Screen, then touch Key Operator Mode.

Enter a 4-digit key operator password, then touch OK to display the Key Operator

Mode Screen.

NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.

2Touch [3] User setting mode to display the User Setting Mode Menu Screen, then touch [3] User lens mode ratio setting to display the User Lens Mode Ratio Setting Screen.

3Touch the USERSET you want to change, then enter a ratio from 0.33~4.00, using the keypad.

If a ratio under 0.33 is entered, 0.33 will be displayed. If a ratio over 4.00 is entered, 4.00 will be displayed.

4Touch OK to complete the setting and return to the User Setting Mode Menu Screen.

5If no further changes are required, proceed to step 7.

6If other user setting changes are required, touch desired key, from [1] ~ [3].

7Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.

8Touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.

13-14 Key Operator Mode

Page 238
Image 238
Konica Minolta 7075 manual User Lens Mode Ratio Setting