Copier Management
Entering an ECM Password
An ECM password is required only when the Electronic Copy Monitor (ECM) feature is activated; a User Password is assigned; and “Enter E.C.M. password” is displayed on the touch screen.
1Enter your
If the ECM password is invalid, the copier will reset to the Initial mode. In that case, enter the correct password; or contact the key operator.
2Press [START] once to display your current copy count and copy limit for 3 sec.
Current count / limit 018888/025000
Ready to copy
When your copy count reaches the copy limit, the following message is displayed:
Copy limit reached 025001/025000
In that case, contact the key operator to reset your copy limit.
3Make copying selections, and enter print quantity, as required.
4When all settings are acceptable, press [START].
Copier Management
