Applications
Non-Image Area Erase
The Non-image area erase mode is used to copy non standard or special originals, such as books, magazines, paste-ups, graphs, thin or thick materials, etc. from the platen glass. The exposed glass area outside the borders of the original will not be copied. This mode helps to preserve the condition of originals; improves copy quality, and eliminates unnecessary toner consumption. Keep the document cover open throughout the procedure.
The Non-image area erase has two modes; namely, Rectangular erase mode and Oblique erase mode. The copier is initially set to Rectangular erase mode. Contact your Konica service representative if you desire the Oblique erase mode.
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
Rectangular erase mode | Oblique erase mode |
| | | | | | | |
❒Copy mode: 1-1 mode only (when using Store mode, 1-2 mode can be selected.)
❒Use the platen glass only.
❒Original size: 11"x17" ~ 10mm x 10mm
❒Image cutoff width: leading end 5mm, trailing end 4mm, top and bottom 2mm.
❒Incompatible Basic Copying Conditions: Using RADF, APS, AMS, Rotation, 2-2, 2-1, Rotation Sort, Rotation Group, Folding, Stapling & Folding, Trimming
❒Incompatible Special Originals: Mixed Original, Z-Folded Original, SDF
❒Incompatible Applications: Sheet/Cover Insertion, Chapter, Combination, Booklet, Image Insert, Book Copy in RADF Store mode, Reverse Image, All-Image Area, Reduce & Shift in Image Shift
NOTE: The Non-image area erase function may not operate properly if the lighting in the work place is directly over the platen glass. In this case, consult your service representative about an appropriate place for installation.
