
Key Operator Mode
Memory Switch Setting [13] (continued)
No. 36: E.C.M. password input timing
No. 37: Key click sound (No paper/JAM)
No. 38: Reserve copy function
No. 39: Scan stop by a pull out tray
No. 40: Change page no. pos. (booklet)
No. 41: Trimmer (STD/Non STD size)
No. 42: Timer which prohibits Printer
Key Operator Mode Screen 1
Auto reset timer/ Complete job
OFF/ 3 seconds/ 5 seconds/ 10 seconds Reserve copy by folder select/ Reserve copy by original set
ON/ OFF
OFF/ ON (Outside page numbering) STD size/ Non STD size
OFF/ 15 seconds/ 30 seconds/ 60 seconds/ 90 seconds
Key Operator Mode Screen 2
Memory Switch Setting Screen
1Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter a
2To display menus [11] to [18] of the Key Operator Mode Screen, touch Lower arrow key.
3Touch [13] Memory switch setting to display the Memory Switch Setting Screen.
4Use the procedure below to select the desired item and change the setting.
(1)To select the desired item, touch the arrow keys (▲) and (▼) at the right of the Memory Switch Setting Screen.
(2)To scroll the screen, touch the arrow keys and
at the lower left.
(3)Touch Change Setting Contents to change the setting of the highlighted item.
(4)Repeat above steps (1) to (3) to make several changes in succession.
5Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other key operator settings are required, select the desired menu item, from [1] to [18].
6If no further changes are required, touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.
NOTE: If an invalid Key operator password is entered, continue by entering the valid
Key Operator Mode