Konica Minolta 7075 manual FS-108/108B Finisher Specifications, Finisher Type, Primary Main Tray

Output Modes

FS-108/108B Finisher Specifications

Use only paper that is recommended by Konica and stored under the environmental conditions stated for copy quality. Special stock is not guaranteed for reliability or copy quality. Multi-sheet bypass tray, Interrupt, and Transparency interleaving are incompatible with finisher use.

This Finisher also accommodates wide paper sizes in addition to the standard sizes described below. See p. 4-9 ~ p. 4-10.

Finisher Type

❒Primary (Main) Tray with built-in 2 stapling: moving tray type Secondary (Sub) Tray

Booklet Tray (FS-108B Finisher only) Cover Sheet Feeder PI-108 (option)

Trimmer Unit TU-108 (option) (FS-108B Finisher only)

Primary (Main) Tray

• Non-Sort Mode

❒Paper size: 11"x17"~5.5"x8.5"

❒Paper weight: 16~24 lb; Special stock (65 lb (176 g/m2 cover paper), transparency film, labels, hole punch, rag content)

❒Paper capacity for 20 lb: 500 sheets 5.5"x8.5"

3,000 sheets 8.5"x11", 8.5"x11"R

1,500 sheets 11"x17", 8.5"x14"

• Sort Mode/Group Mode

❒Paper size: 11"x17"~5.5"x8.5"

❒Paper weight: 16~24 lb

❒Paper capacity for 20 lb: 500 sheets 5.5"x8.5"

3,000 sheets 8.5"x11", 8.5"x11"R

1,500 sheets 11"x17", 8.5"x14"

• Staple-Sort Mode

❒Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11"

❒Paper weight: 16~24 lb

❒Paper capacity for 20 lb: 1,000 sheets*1

❒Staple capacity: 50 sheets*2 (5.0mm thick or less)

❒Staple position: See p. 7-9.

NOTES:

*1: Variable according to the number of pages to be stapled. See p. 4-9 for detail.

*2: Staple sheet capacity is changeable, and may be set to 45, 40 or 35 by service.

7-2 Output Modes