Key Operator Mode
Copier Initial Setting [2] (continued)
Key Operator Mode Screen | Copier Initial Setting Screen |
1Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter a
NOTE: If an invalid Key operator password is entered, continue by entering the valid
2Touch [2] Copier initial setting to display the Copier Initial Setting Screen.
3Make a selection for each mode as initial settings. Touch RADF to select or deselect it.
4Touch OK to complete the setting and return to the Key Operator Mode Screen.
5If no further changes are required, proceed to step 7.
6If other key operator settings are required, touch desired key.
7Touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.
Key Operator Mode
