Konica Minolta 7075 manual How to Access the Key Operator Mode

Key Operator Mode

To the Key Operator (continued)

How to Access the Key Operator Mode

1Press the [HELP] button on the Control panel to display the Help Screen.

2Then, touch the Key Operator Mode on the Help Screen.

The Key Operator Password Entry Screen displays when the 4-digit key operator password is set by service.

Otherwise, the Key Operator Mode Screen displays without the password requirement.

3If the Key Operator Password Entry Screen is displayed, use the keypad on the touch screen to enter your 4-digit key operator password; then touch OK, to display the Key Operator Mode Screen. (See note.)

If the key operator password is not valid, check with your service representative.

4To display menus [11] to [18] of the Key Operator Mode Screen, touch the lower arrow key. To return the menu [1] to [10] of the Key Operator Mode Screen, touch the upper arrow key.

5Make setting changes from the Key Operator Mode Screen, as described on the following pages.

NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.

Key Operator Mode 13-3