Konica Minolta 7075 manual Timer Setting

Key Operator Mode

Weekly Timer [9] (continued)

Timer Setting [2]

Use this function to set the On/Off times in hours and minutes for each day of the week or set the collective time for the entire week, i.e., the same On/Off time for each day.

Weekly Timer Setting Menu Screen Weekly Timer On/Off Time Setting Screen

Weekly Timer On/Off Time Collective Setting Screen

1Press [HELP] to display the Help Screen, then touch Key Operator Mode.

Enter a 4-digit key operator password, then touch OK to display the Key Operator Mode Screen. (See note 1.)

2Touch [9] Weekly timer. Enter your 4-digit Weekly timer master key code, then touch OK to display the Weekly Timer Setting Menu Screen. (See note 2.)

NOTES:

1If an invalid Key operator password is entered, continue by entering the valid 4-digit password.

2If an invalid Weekly timer master key code is entered, continue by entering the valid 4-digit code.

3Touch [2] Timer setting to display the Weekly Timer On/Off Time Setting Screen.

4When the screen is displayed, the ON-time of Monday is always highlighted.

Enter a 2-digit ON-hour (ex. 8 a.m. is 08) and a 2-digit ON-minute (ex. 7 min. is 07) using the touch screen keypad, and then touch SET.

Touching SET repeatedly will shift the input section from Monday ON, Monday OFF, Tuesday ON, Tuesday OFF e.g.

NOTES:

•If ON-time and OFF-time are the same, power will not go on.

•If the setting is 00:00~00:00, you will not be able to set the copiers off/on condition for specific days.

When setting Sunday OFF-time, Monday ON-time is highlighted again. Proceed to step 6.

Key Operator Mode 13-31