Konica Minolta 7075 manual Sort Mode Using Primary Main Tray

Output Modes

Sort Mode Using Primary (Main) Tray

Use this mode when you want to output multiple copies of the original set, and have each sorted set offset upon exit. The staple mode can be selected with the sort mode. With the Primary (main) tray initially selected on the Finisher Mode Selection Screen, FS-108/108B outputs the printed sheets FACE DOWN in the proper order.

❒Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"

(5.5"x8.5" paper is available in landscape type feeding ( ) only)

❒Paper capacity for 20 lb: 500 sheets 5.5"x8.5"

3,000 sheets 8.5"x11", 8.5"x11"R

1,500 sheets 11"x17", 8.5"x14"

Basic Screen

3

1 2

3

1 2

30mm

1Touch SORT on the Basic Screen to highlight it.

2Enter the desired print quantity.

3Position originals in the document feeder, and make copying selections as required. When using Store mode, see p. 6-28 to p. 6-30.

4Press [START].

CAUTION:

When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets while the paper is exiting; otherwise mishandled paper will occur.

7-6 Output Modes