Shortcuts
Loading Paper (p. 14-2)
Main Body
1Withdraw the main body tray, then place paper into the tray with the curl turning up. Load size 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R or 5.5"x8.5" (portrait).
Do not stack paper above the level of the red line.
2Move the green levers located at the front and left side until they meet the edge of the stack of paper.
3When paper is seated properly, push the tray back fully into the copier.
LCT (Large Capacity Tray:
1Open the LCT upper door (lift lid).
2Press the Paper load button located at the front of the LCT to lower the bottom place of the LCT.
3Load the fixed size paper into the LCT with the paper curl turning down (see note).
4Repeat Steps 2 and 3 until the bottom plate cannot go down any more. Do not stack paper above the paper hook level.
5When the stack of paper is seated properly in the tray, close the LCT upper door (lid).
NOTE: When loading Tab sheets, be sure the tab extensions are positioned at the rear side of the tray (not at the front where the Paper load button is located), and jutting to the right, away from the hinged side of the LCT cover.
Adding Toner (p. 14-7)
CAUTION
Keep toner cartridge away from children. Although the toner is
1Open the machine front door and pull out the toner unit 90° to the right.
2Move the toner cartridge lock lever toward the front until it stops, then remove the empty toner cartridge.
3Shake the new toner cartridge several times to loosen toner, then remove the cartridge protective cap.
4Set the new toner cartridge into the toner unit, aligning the hollow part of the cartridge with the arrow on the toner unit.
5Move the toner cartridge lock lever BACK until it stops, then return the toner unit to its original position.
6Close the machine front door.
