Konica Minolta 7075 manual Finisher Adjustment

Key Operator Mode

Finisher Adjustment [17]

Use this mode to make fine adjustments to each function of the finisher.

Key Operator Mode Screen 2 Finisher Adjustment Menu Screen

Stapling&Folding Stopper Position Adjustment Screen Folding Stopper Position Adjustment Screen

Trimming Stopper Position Adjustment Screen

1Press [HELP] to display the Help Screen, then touch Key Operator Mode.

Enter a 4-digit key operator password, then touch OK to display the Key Operator Mode Screen. (See note.)

2To display menus [11] to [18] of the Key Operator Mode Screen, touch Lower arrow key.

3Touch [17] Finisher adjustment to display the Finisher Adjustment Menu Screen.

4Touch the desired menu key to display the adjustment screen for each function.

5Make fine adjustment on the screen. To go on or back to another adjustment screen, touch NEXT or PREVIOUS. Touching PREVIOUS SCREEN restores the Finisher Adjustment Menu Screen.

6Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other key operator settings are required, select the desired menu item, from [1] to [18].

7If no further changes are required, touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.

NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.

Key Operator Mode 13-49