Konica Minolta 7075 manual M. All Count Reset

Key Operator Mode

ECM (Electronic Copy Monitor) Function Setting [4] (continued)

E.C.M. All Count Reset [2]

Reset the count for all ECM accounts.

ECM Setting Menu Screen ECM All Count Reset Screen

1Press [HELP] to display the Help Screen, then touch Key Operator Mode.

Enter a 4-digit key operator password, then touch OK to display the Key Operator Mode Screen. (See note 1.)

2Touch [4] E.C.M. function setting. The ECM Master Key Code Screen displays, if a code is required.

3Enter your 8-digit ECM master key code, then touch OK to display the ECM Setting Menu Screen. (See note 2.)

4Touch [2] E.C.M. all count reset. The ECM All Count Reset Screen will be displayed.

5Touch YES to reset all counters to zero and to return to the ECM Setting Menu Screen.

Or, touch NO to cancel. Touching PREVIOUS SCREEN will also cancel this function and return to the ECM Setting Menu Screen.

6If other ECM setting changes are required, touch desired key, from [1]~[3].

7Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other key operator settings are required, select the desired menu item, from [1] to [18].

8If no further changes are required, touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.

NOTES:

1If an invalid Key operator password is entered, continue by entering the valid 4-digit password.

2If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.

Key Operator Mode 13-21