Safety Information
Machine Installation and Power Requirements
CAUTION:
FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR MACHINE DAMAGE
❒FIRE PREVENTION
Install machine away from flammable or volatile materials. Routinely check for abnormal heat from power cord and/or plug.
❒SHORT CIRCUIT FROM WATER DAMAGE
Do not install or operate this equipment outdoors near a lake, pond, or river, etc.; and do not allow the machine to come in contact with splashes of rain, water, or any liquid.
❒TEMPERATURE AND HUMIDITY
Install the machine away from direct sunlight, heat sources (stoves, heaters) and cold temperatures (air conditioners). Avoid any environment that is outside 50°C~86°F (10°~30°C), with 10~80% humidity.
❒VENTILATION
Do not allow the machine to come in contact with dust or ammonia gas, or fumes from printing or cleaning solutions, etc.; otherwise, image quality will be poor. Install the machine in a
❒VIBRATIONS
If the machine is constantly vibrated or jolted, trouble may occur. Install the machine on a level, horizontal floor, free from vibrations.
Temperature |
Vibration |
❒SPACE ALLOTMENT
Install machine in an area with adequate space for performing copier operations; replacing supply items; and for conducting preventive maintenance. See Site Requirements, Section 3.
❒MACHINE RELOCATION
Before moving the machine to another location, contact your Konica service representative.
Safety Information
