Konica Minolta 7075 manual Loading Tabbed Sheets in Tray 4 LT-401/LT-411

Maintenance & Supplies

Loading Paper (continued)

Loading Tabbed Sheets in Tray 4 (LT-401/LT-411)

Load offset tabbed sheets so that the tab extensions are on the right at the rear (not front) of the tray.

When loading tabbed sheets in the tray, be sure to specify the paper type as TAB in the Key operator mode; otherwise mishandled paper may occur. See p. 13-24 to p. 13-25.

The top sheet is designated face up as the first tab of the finished set. Subsequent offset tab sheets follow in sequence.

Front

Rear

Example (LT-401): 3 Tabbed sheets loaded in position for one finished set.

			1st TAB
	1st TAB	Section 1	2nd TAB
Section 1	2nd TAB	Introduction
Introduction	3rd TAB
Printed
side			3rd TAB

ONE FINISHED SET

Example (LT-401): 9 Tabbed sheets loaded in position for 3 finished sets.

Rear

Front

Section 1

Introducttion

Printed side

1st TABS 2nd TABS 3rd TABS

1st TAB

Section 1

Introduction

2nd TAB

Section 1	Section 1
Introduction	Introduction

3rd TAB

3 FINISHED SETS

14-6 Maintenance & Supplies