Konica Minolta 7075 manual Initial Settings, Auto/Reset Mode

Machine Information

Initial Settings

Initial settings represent the initial condition when power is turned on; when ECM password is set; or when Auto/Reset mode is restored, either manually or automatically.

Print Quantity; 1

Magnification Ratio: 1:1 (key operator setting)

RADF: ON (key operator setting)

Copy mode: 1-1 mode (key operator setting)

AES: (Automatic Exposure Selection) : ON (key operator setting)

APS: (Automatic Paper Selection): ON (key operator setting)

Finisher: Non-sort on Primary (main) exit tray (key operator setting)

Auto/Reset Mode

The Auto/Reset function can be set for OFF/ 30 seconds/ 1 minute/ 1.5 minutes/ 2 minutes/ 2.5 minutes/ 3 minutes/ 3.5 minutes/ 4 minutes/ 4.5 minutes/ 5 minutes by the key operator. Initially, the mode is set to function after 1 minute of copier inactivity. The Auto/Reset key function also re-displays the Basic Screen, unless these settings are changed by the key operator in the Copier Initial Setting Screen. See p. 13-10 to p. 13- 11.

Automatic Paper Selection (APS)

When APS is highlighted on the touch screen, the appropriate copy paper size is automatically selected. When copying from the platen glass or document feeder, APS detects the sizes indicated below. For key operator settings of APS, see p. 13-40 to p. 13-45.

PLATEN GLASS: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5"

RADF: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R, A4 (8.27"x11.69", 210mmx297mm)

Automatic Magnification Selection (AMS)

AMS functions automatically. An appropriate ratio is selected, based on the relationship of copy size to original size.

Automatic Exposure Selection (AES)

When AES is highlighted on the touch screen, the appropriate exposure level is automatically selected to match the copy density of the original. Manual density adjustments override AES.

Automatic Tray Switching (ATS)

When the selected paper tray becomes empty while copying is in progress, automatic tray switching detects the same copy paper size loaded in another tray to allow copying to be continued without interruption. The Multi-sheet bypass tray is not included in tray switching.

Machine Information 3-11