Konica Minolta 7075 manual Release Auto Low Power

Copier Management

Power Saver Mode

There are two modes for the Power saver as described below.

Low power mode enables you to conserve energy by maintaining a lower fixing temperature during periods of copier inactivity.

Shut-off mode conserves even more energy by partially turning OFF the power supply.

Auto Low Power

This function automatically lowers the power after a specified period of copier inactivity. The Auto low power function can be set to 5 minutes/ 10 minutes/ 15 minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes. Initially, the mode is set to function after 15 minutes of copier inactivity. For the key operator setting, see p. 13-39. The [POWER SAVER ON/OFF] LED goes on.

Basic Screen

Release Auto Low Power

Press any key on the control panel. The Auto low power will be released and the LCD screen recovers usual brightness.

5-2 Copier Management