Safety Information
Machine Installation and Power Requirements (continued)
CAUTION:
FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN MACHINE DAMAGE, OVERHEATING, RISK OF ELECTRICAL SHOCK, AND/OR PERSONAL INJURY
❒PLUG SOCKET
A plug socket is limited in capacity. Use an exclusive power source for this machine; otherwise, an accident from overheating and/or smoking may occur. The total power consumption of the main body, plus all peripherals, must not exceed the capacity of the main power supply.
For plug cable equipment, that the
❒PLUG AND CORD (LEAD)
Unless the power plug is firmly inserted into the socket, an accident from overheating and/or smoking may occur. Firmly insert the power cord plug into the electrical outlet before turning on the copier power switch. If the inserted plug is loose in the socket, disconnect it, and consult an electrician for repair; but, do not attempt to operate the machine.
For plug cable equipment, that the
A damaged power cord may result in overheating, short circuit or fire. Do not bend, crush, wind, or kick the cord; or strike it with a desk or any item; or roll up the power cord. If the main body power cord is bent or damaged, immediately contact your Konica service representative; and do not attempt to repair it yourself, or continue to operate the machine.
❒ADAPTERS AND PLURAL LOADS
Never use adapters; and never connect plural loads or a branched socket to one socket outlet; otherwise an accident may occur from overheating or fire.
❒EXTENSION CORDS (LEADS)
An extension cord or lead is limited in capacity. Unless the cord or lead has adequate capacity, smoking may occur, and an accident may be caused from overheating. Should smoking and/or overheating occur, contact an electrician immediately. If you require further information about power requirements, power consumption, extension cords, adapters and connectors, please contact your Konica service representative, and also consult your electrician.
