Machine Information

Touch Screen

The touch screen is an LCD that displays interactive screens with touch sensitive keys for making copy job selections. Selections are highlighted at the touch. The screens also work with the conventional control panel keys.

CAUTION: The touch screen of the control panel is covered with glass. Do not drop heavy items on the glass, or put excess weight or pressure on it; otherwise the glass may break or become scratched.

After the power switch is turned on, the Konica name displays for approximately 10 seconds, until initial machine settings are established. Then, the Warm-Up Screen displays for approximately 6 minutes, until the fixing temperature is reached.

When the Basic Screen is displayed, the touch screen becomes interactive. The interactive condition enables you to communicate directly with the copier system simply by touching keys displayed on the screen; or by pressing conventional keys, as required. In addition, the screens automatically display information regarding machine and copying status. Additional help is available any time with the [HELP] key, which can be pressed from any screen, except from Job Memory or Key Operator Mode Screens.

Basic Screen

The Basic Screen displays after warm-up. The initial settings show on the next page. Except for Print Quantity, all initial settings can be changed by the key operator.

The following modes can be accessed from this screen:

Copy Mode, Copy Density, Lens Mode, Copy Size, Special Original, Application, Output Menu.

3-10 Machine Information

Page 46
Image 46
Konica Minolta 7075 manual Touch Screen, Basic Screen