Konica Minolta 7075 manual Key Operator Data Setting

Key Operator Mode

Key Operator Data Setting [8]

Use this screen to enter the name and extension number of the key operator indicated on the Help Screen developed from the Basic Screen.

❒Setting options: 5-digit key operator telephone extension; Max. 8-character key operator name

Key Operator Mode Screen Key Operator Data Setting Screen

1Press [HELP] to display the Help Screen, then touch Key Operator Mode.

Enter a 4-digit key operator password, then touch OK to display the Key Operator Mode Screen. (See note.)

2Touch [8] Key operator data setting to display the Key Operator Data Setting Screen.

3Touch Name to highlight it, then enter the key operator name up to 8 characters from the touch screen keypad.

4Touch Key Operator Tel. No. to highlight it, then enter a 5-digit extension number from the touch screen keypad. If the extension number is less than 5 digits, use a hyphen [-] to make it five. The hyphen added in the beginning will be indicated as a space on the Help Screen.

5Touch OK to complete the setting and return to the Key Operator Mode Screen.

6If other key operator settings are required, touch desired key, from [1] to [18].

7If no further changes are required, touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.

NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.

Key Operator Mode 13-27