Output Modes
Output Modes Using Secondary (Sub) Tray (continued)
Group + Face up | Finisher Mode Selection Screen |
1Touch OUTPUT APPLI. on the Basic Screen to display the Finisher Mode Selection Screen.
2Touch SUB TRAY to display the popup menu OUTPUT<SUB TRAY>.
3Touch the desired key(s) on the popup menu to specify one of the four output modes. To select
To select
To select Group and face down exit, touch GROUP and FACE DOWN. To select Group and face up exit, touch GROUP and FACE UP.
4Touch OK on the Finisher Mode Selection Screen to complete the setting and return to the Basic Screen.
The selection made in output mode using secondary (sub) tray will be reflected in the OUTPUT icon area of the Basic Screen.
5Enter the desired print quantity.
6Position originals in the document feeder, and make copying selections as required. When using Store mode, see p.
7Press [START].
CAUTION:
When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets while the paper is exiting; otherwise mishandled paper will occur.
