Key Operator Mode
User Setting Mode [3] (continued)
User Density Level 2 Setting [2]
Output copying samples from 16 density levels from Lighter to Normal or Normal to Darker, then select the desired exposure and program it as USER 2.
The programmed copy density can be recalled by selecting USER 2 on the Basic Screen.
User Setting Mode Menu Screen | User Density Level 2 Setting Screen |
1Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter a
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid
2Touch [3] User setting mode to display the User Setting Mode Menu Screen, then touch [2] User density level 2 setting to display the User Density Level 2 Setting Screen.
3Place the original on the platen glass or in the RADF.
4Touch Darker or Lighter to select the density level to be programmed.
5Touch No.1 1~4, No.2 5~8, No.3 9~12, No.4 13~16, or Set density ##, then press [START]. The density level sample sheet will be output.
6Select the desired exposure from the sample sheet(s), then enter the density level No. by using the touch screen keypad.
7Touch OK to complete the setting and return to the User Setting Mode Menu Screen.
8If no further changes are required, proceed to step 10.
9If other user setting changes are required, touch desired key, from [1]~[3].
10 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
11 Touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.
Key Operator Mode
