
Key Operator Mode
System Initial Setting [1] (continued)
IP Address Setting [3]
When using the Job Editor function, this setting is required to enable a PC to gain access to this machine.
NOTE: Ask your network manager to perform this setting. Incorrect setting may cause a trouble in other network systems.
❒Setting options: IP address; Subnetmask; Gateway addess, Line speed
System Initial Setting Menu Screen | IP Address Setting Screen |
Line Speed Setting Screen
1Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter a
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid
2Touch [1] System initial setting to display the System Initial Setting Menu Screen, then touch [3] IP address setting to display the IP Address Setting Screen.
3Make the required setting. When customizing the line speed, touch Line speed setting to display the Line Speed Setting Screen. Touch the desired key, then touch OK to restore the IP Adress Setting Screen.
4Touch OK to complete the setting and return to the System Initial Setting Menu Screen.
5If no further changes are required, proceed to step 7.
6If other system initial settings are required, touch desired key.
7Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
8Touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.
Key Operator Mode