
Troubleshooting
Call for Service (continued)
Limited Use of the Copier in Trouble
If the message shown below is displayed on the Call for Service Screen, you may continue operating the copier on a limited function basis and utilize the trays and ADU that are not affected by the trouble. To obtain this limited functionality of the copier, consult your Konica service representative. Be sure to utilize the limited function only temporarily, and arrange for machine repair immediately.
1If limited use of the copier is available, the following message is displayed in the message area instead of the Report code.
Tray 1 failure
Press AUTO to select except this tray
2Press [AUTO RESET].
Please switch ON/OFF
E
3Turn OFF then ON the power switch.
A copying job can be continued without using the troubled portion of the machine (ex. Tray 1).
CAUTION
EVEN IF THE COPYING JOB CAN BE CONTINUED WITH THE ABOVE OPERATION, IMMEDIATELY CONTACT YOUR KONICA SERVICE REPRESENTATIVE WHEN THE CALL FOR SERVICE SCREEN IS DISPLAYED.
Troubleshooting