Basic Operations
Interrupt Mode (continued)
2Remove any document from the platen glass or from the document feeder, if present.
3Place new original(s) on the platen glass or in the document feeder.
4The copying settings in Interrupt mode are as follows.
Copy Mode | : 1s1 |
RADF | : ON |
AES | : ON |
Lens Mode | : 1:1 (1.00) |
APS | : ON |
Print Quantity | : 1 |
Finisher | : ON |
Select other copying features that are compatible with the Interrupt mode, if desired.
5Press [START].
6When Interrupt copying is completed, press [INTERRUPT] again to return to the settings of the initial job.
7Replace the initial original, then press [START] to resume copying.
NOTES:
1In Reserve mode, pressing [INTERRUPT] before the copier finishes scanning originals of the reserve job will clear the settings selected for reserve job.
2When [CHECK] is pressed during Interrupt Copying, the information displayed reflects the initial copy job settings. Check mode will not display Interrupt copy job information.
Basic Operations
