Key Operator Mode
ECM (Electronic Copy Monitor) Function Setting [4] (continued)
E.C.M. Data Edit [1] (continued)
1Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter a
2Touch [4] E.C.M. function setting. The ECM Master Key Code Screen displays, if a code is required.
3Enter your
Menu Screen. (See note 2.)
NOTES:
1If an invalid Key operator password is entered, continue by entering the valid
2If an invalid ECM master key code is entered, continue by entering the valid
4Touch [1] E.C.M. data edit. The ECM Data Edit Screen will be displayed.
To change, add, or delete the ECM data, and to reset the copy count of the individual account, follow the procedure for each as described below.
To Change ECM Data:
(1)Touch ▲ or ▼ key on the right side of the list to highlight the ECM data to be changed, then touch Change. The ECM Data Change Screen will be displayed.
(2)Touch the desired item key to highlight it, then enter new data by using the touch screen keypad.
Password: 8 digits max. (See note 1.)
Name: 8 characters max. (See note 2.)
Limit: 999,999 copies max.
NOTES:
1We recommend that you make a list of all ECM passwords and account numbers.
2If an invalid user name is entered, continue by the valid name.
(3)Touch OK to complete the setting and to verify whether the same password or name has been already used for another account No.
When a password is duplicated:
The Password Duplication Screen will be displayed. Touch YES to
NOTE: If duplicate password is created, the number of copies will be counted only for the ECM password with the smallest No. We recommend you do not use duplicate ECM password.
When a name is duplicated:
The Name Duplication Screen will be displayed. Touch OK to
