Konica Minolta 7075 manual Non-Sort Mode Using Primary Main Tray

Output Modes

Non-Sort Mode Using Primary (Main) Tray

The Non-sort mode simply means that the offset-stacker finisher modes are not selected. Copies will be stacked upon exit without being offset by sorted sets.

With the Primary (main) tray initially selected on the Finisher Mode Selection Screen, FS-108/108B outputs the printed sheets FACE DOWN in the proper order.

❒Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"

❒Paper capacity for 20 lb: 500 sheets 5.5"x8.5"

3,000 sheets 8.5"x11", 8.5"x11"R

1,500 sheets 11"x17", 8.5"x14"

Basic Screen

3

1 2

3

1 2

1Touch SORT on the Basic Screen to deselect it, if highlighted.

2Enter the desired print quantity.

3Position original(s) in the document feeder or on the platen glass, and make copying selections, as required.

4Press [START] to begin copying in Non-sort mode.

Copies will exit face down, with the page heading toward the front of the copier.

CAUTION:

When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets while the paper is exiting; otherwise mishandled paper will occur.

Output Modes 7-5