Shortcuts
Transparency Interleave (p. 9-15)
1First, load the same size copy paper as the transparencies in any regular tray.
2Insert one transparency sheet at a time into the
3Touch APPLI. to display the Application selection screen.
4Touch Transparency Interleave to display the Transparency interleave screen.
5Touch Blank Sheet Interleaving or Copy Sheet Interleaving, unless your choice is already highlighted.
6Touch OK to return to the Application selection screen.
7Make additional selections.
8Touch OK to return to the Basic screen with the required print quantity of [1] automatically selected.
9Position the original face up on the RADF (document feeder) tray or face down on the platen glass.
10Press [START]. When copying is completed, press [AUTO RESET] to reset the machine.
Image Insert (p. 9-17)
1In preparation, note the page No. locations of the images you will be scanning from the platen glass.
2Touch APPLI. to display the Application selection screen.
3Touch Image Insert to display the Image insertion No. setting screen.
4Enter up to 30 page No. locations, touching SET after each entry.
5When all page No. locations are entered, touch OK to restore the Application selection screen.
6Make additional copying selections, or touch OK to return to the Basic screen. The Store mode is automatically selected.
7To start scanning, position the regular originals face up on the document feeder tray, then press [START].
8After the originals on the RADF (document feeder) tray are scanned, enter the print quantity amount for the job.
9Next, position one original at a time on the platen glass in ascending order of pagination, i.e., 1~n.
The platen glass originals can be paste ups, graphs, photos, newspaper articles, or any
10In turn, press [START] to scan each original from the platen glass.
11Touch STORE to exit the Store mode.
12Press [START] to combine the
Shortcuts
