Output Modes
Folding, Stapling & Folding and Trimming Modes
The Folding and Stapling & Folding modes are available only when the
NOTES: 1. When copying
2.When copying dark originals or using Reverse Image mode together with Folding, Stapling & Folding or Trimming mode, the folded line of the output copies may be slightly shifted.
The following copy results may be expected when using Folding, Stapling & Folding or Trimming mode:
In the Folding mode, each copied set is folded and output to the Booklet tray of the finisher.
In the Stapling & Folding mode, each copied set is stapled at two positions (saddle stitched), then folded and output to the Booklet tray of the finisher.
In the Trimming modes, each copied set is either folded or stapled & folded; trimmed at the edge that opens the booklet; then output to the Trimmer uint tray.
❒Use RADF.
❒Max. number of folded sheets (20 lb Bond) in both modes:
Folding; 3 sheets (less than in Staple & Folding mode because they are not cinched first)
Stapling & Folding: | 16 sheets |
| 15 sheets when using thick cover paper |
Folding and Trimming; | 3 sheets |
Stapling & Folding and Trimming; | 16 sheets |
| 15 sheets when using thick cover paper |
❒Paper size: 11"x17", 8.5"x14", 8.5"x11"R, A4R
❒Paper weight: 16~24 lb; Special stock (20 lb paper is recommended)
❒Booklet tray capacity:
When the Booklet tray capacity is exceeded, the finisher will stop operating. Select an appropriate print quantity referring to the following capacity.
Approx. 100 sheets max.
Folding;33 sets max. of
6sets max. of
❒Trimmer unit tray capacity:
When the Trimmer unit tray capacity is exceeded, the finisher and trimmer unit will stop operating. Select an appropriate print quantity referring to the following capacity. Approx. 512 sheets max.
Folding and Trimming; 100 sets max. of
50 sets max. of
❒Incompatible Basic Copying Conditions with Booklet selected: APS, Sort,
Output Modes
