Konica Minolta 7075 manual Introduction

Introduction

Features of the Konica 7075 (continued)

• Stamp/Overlay

Imprint a stamp, watermark, or scanned image onto the copy image.

• Staple

Select the stapling position and number of staples (3 positions).

• STD Size (Special)

Detect the standard paper sizes which cannot normally be detected (A4R and A5) when loaded in a main body tray. A5R and F4 sizes will also be available when loaded in the Multi-sheet bypass tray.

• Tab Paper

Copy onto tabbed sheets from tabbed originals, allowing the image on the tab part of the original to be printed on the same part of the tabbed copy paper.

• Text/Photo Enhance

Enhance photo image in Photo mode; regular image in Auto mode; enhance text image in Text mode; enhance lighter image in increase contrast mode.

• Transparency Interleave

Copy onto transparency film and interleave blank or copied paper for each original copied.

•Trimming mode for FS-108B Finisher with TU-108 Trimmer Unit installed: Trim the end of folded or stapled & folded booklets.

•Userset Density (USERSET 1, USERSET 2)

Output up to 16 density samples on a total of 4 pages that display 4 samples per page, then program the desired density under USERSET 1 and/or USERSET 2.

• Weekly Timer

Can be set according to the needs of each work environment. Turn main body power Off/On daily or weekly, during lunch time, on holidays, and also enable the timer- interrupt mode, which allows temporary use of the machine even when the machine is in the daily, weekly, or holiday Off mode.

• Wide Size Paper

Copy onto paper slightly larger than the specified regular size.

• Z-Folded Original

This feature sets the RADF to accept Z-folded originals.

1-10 Introduction