Konica Minolta 7075 manual Copier Initial Setting

Key Operator Mode

Copier Initial Setting [2]

Initial settings are the settings that display automatically when the copier is powered on, when Auto/Reset timer is operated, or when [AUTO RESET] key is pressed. These settings can be changed by the key operator, as shown in this section.

Initially, i.e., at installation, the Basic Screen displays the following condition to meet Energy Star requirements:

Initial Setting

Copy Mode: 1-1

Copy Density: AES

Lens Mode: 1:1

Paper Tray: APS

Output Mode: offset sort

When Initial settings are changed by the key operator, the new initial settings display when the copier is powered on, when Auto/Reset timer is reached, or when [AUTO RESET] key is pressed.

The following initial settings can be changed by the key operator:

Copy mode: [RADF; 1-1; 1-2; 2-2; 2-1]

Copy density: [AES; manual]

Lens mode: [AMS; ratio 0.33~4.00]

Paper tray: [APS; trays 1, 2, 3, or 4]

Output mode: [non-sort; group; staple-sort; stapling & folding; folding; cover sheet]

Special original: [Image Quality; Text/Photo Enhance; Special Original; Original Form]

Rotation: OFF

Setting procedures are described on the following pages.

NOTE: The most commonly-used settings are established at installation. Before changing any of the copier settings, be sure that you understand the overall and long-range effect of the change.

13-10 Key Operator Mode