Memory Backup — If power is lost or disconnected, the scanner retains the frequencies you programmed in its memory.
Temporary Lockout — Makes it easy to temporarily lock out a system, channel, or frequency. The lockout is cleared when you turn power off, then back on so you don’t have to remember to unlock the channels later.
Startup Configuration — Lets you easily manage multiple configurations for your scanner.
Record Out Jack — Using the appropriate cable and audio recording device with signal control, you can record live audio of designated channels.
Display and Keypad Backlight — Makes the display and keypad easy to see in dim light using two color options and six light levels plus off.
Vehicle Power Connection (Orange Wire) — Lets you connect to your vehicle’s dimmer circuit to also dim the scanner’s display with the vehicle’s dimmer control.
Trunk Tracker IV™ Operation — Follows unencrypted conversations on analog Motorola, Motorola Astro 25 (APCO 25), EDACS, EDACS SCAT, and LTR trunked radio systems, including systems in VHF, UHF, 700 MHz, 800 MHz, and 900 MHz bands. The scanner can scan both conventional and trunked systems at the same time.
Control Channel Only Scanning — If the scanner is set to scan a Motorola system, you can set it so it scans using only control channel data. You do not have to program voice channel frequencies into memory in this mode as long as all possible control channels are programmed.
Adaptive Digital Threshold — Automatically sets the digital decode threshold for APCO 25 systems.
GPS
Location Based Scanning — If you connect a GPS unit to the scanner it can automatically enable and disable systems based on the Location Information (longitude, latitude, Range) that you provide.
GPS
GPS Display Mode — Lets you display extended GPS information such as
14
