Locking/Unlocking Systems
Follow these steps to lock out a system so that it does not scan even if its quick key is selected.
1.Tap the Scroll Control to switch to the Function Mode 
then rotate the control to select the desired system.
2.Press [L/O] to temporarily lock out the system. Temporary L/O appears. Or, quickly press [L/O] twice to permanently lockout the system. Locked Out appears.
3.To unlock temporarily locked out systems, turn power off and then back on. To unlock permanently locked out systems, repeat Steps 1 and 2. System Unlocked appears.
Locking/Unlocking Channels
If the scanner has stopped on a channel press [L/O] once to temporarily lock it out or quickly press [L/O] twice to permanently lock it out. Cycling power off/on automatically unlocks temporarily
To lockout a channel when the scanner has not stopped on the channel, or to unlock a permanently
1.Press [HOLD/RESUME] to hold on a channel.
2.Tap the Scroll Control to switch to the Function Mode 
, then rotate the control 
to select the system where the channel is stored.
3.Tap the Scroll Control or wait 2 seconds, then rotate the Scroll Control 
to select the channel you want to lock or unlock.
4.Press [L/O] to temporarily lock or unlock the current the channel.
ID Scan/ID Search Mode
While you are scanning a trunked system, the scanner can be in either ID Scan or ID Search mode:
ID Scan — the scanner only stops on talk group ID’s (TGID) that you have programmed into the system that are unlocked.
48
