Logicube Omniclone Xi user manual Mirror Clone Mode, Mirror Clone Step-by-Step

CLONING MODES AND SETTINGS

Mirror

Simple partition mirror (no adjustments)

None

Do not copy this partition

Mirror Clone™ Mode

This mode simply makes a bit-by-bit mirror copy of the Master drive. It does not adjust any values. This mode is only recommended when all else fails and even then only between similar geometry drives. It is also recommended for non-Windows partitions like UNIX, LINUX and other such systems.

NOTE: Drives in a RAID array have dynamic or striped partitions and also need to be Mirror Cloned. When cloning a multiple drive RAID array, each drive in the array needs to be Mirror cloned to an identical Target drive.

You can dial the percentage of Master disk you wish to mirror. For example, setting to 50% will mirror the first 50% of the Master drive’s size.

Mirror Clone™ Step-by-Step

1.From anywhere in the menu system click the “Set” button to enter the Settings menu.

2.Press the Cloning Mode icon that appears in the upper left-hand corner. A list of the available cloning modes appears.

3.Press the “Mirror” icon.

4.A screen appears asking you what percentage of the Master drive to clone. Touch the numeric keypad to adjust this value from 0 – 100%. If a value of 99% or less is chosen for the FRONT of the drive, the unit will also ask for a percentage from the REAR of the drive. This value can be set to the total size of the remaining space.

For example, if you were to enter 20 for the front and 30 for the back, Mirror Clone would copy the first 20% of the Master drive, skip over the next 50% and clone the remaining 30%.

5.You may now double-click the “Start/Stop” button to start cloning.

Logicube Omniclone Xi ™ User’s Manual 17