Logicube Omniclone Xi ™ User’s Manual 46
9. User Replaceable Hardware
Introduction
Many of the components that make up the Logicube
Omniclone Xi™ are designed to be removable by
the user. This includes drive cables, drive stations
and even the power supply itself. This is beneficial
in a production setting where a company cannot
afford to send in an entire 10-Target duplication unit
to repair one drive station. Instead, Logicube can
ship a new drive station module and the user can
install it in less than one minute.
NOTE: Users who operate the Omniclone Xi™ unit
in a large production setting are advised to keep
spare cables, drive stations and even an extra
power supply handy in case of emergency.
Drive Cables
The UDMA, power and SATA Cables that connect
Master and Target drives to the Omniclone Xi™ are
designed to withstand up to 500
insertions/extractions. This means that through
proper handling, the cables can be pulled off and
attached to 500 different drives before the heads
start to wear out. Improper handling of the cables
can cause this number to go down significantly.
Because the drive cables have a significant shelf
life, they are considered consumable items and are
not covered under the same warranty as the
Omniclone Xi™ unit. Please contact Logicube
Sales if you need to purchase replacement cables.