Logicube Omniclone Xi user manual Barcode Scanner Settings

THE DATABASE/BARCODE OPTION

Barcode Scanner

The Barcode Scanner is used to enter data that is not accessible from inside the Omniclone-Xi™ unit. The data could include things such as an Operator Badge number or other data that is in barcode form.

As of this writing, the Barcode scanner wand that ships with the Database/Barcode option is a CCD- LR (Long Range) Scanner made by Wasp Technologies (Model # WLR-7100).

Barcode Scanner Settings

The Barcode Scanner is designed to plug into the Omniclone-Xi™ and work without any special settings. However, there are a few basic settings available to customize the Barcode Scanner.

To use the settings below, just scan them with the Barcode Scanner while it is plugged into the Omniclone-Xi™ unit and powered up. The scanner will emit a double-beep when it reads the barcode.

NOTE: The DataBase™ function does not need to be running for the Barcode scanner to scan Factory Settings.

Factory Default – Scan this barcode to set your Barcode scanner back to the factory default settings.

Autosense Stand Mode – Scan this barcode to enable the “Hands-Free Autosense” feature of your Barcode Scanner. This allows the user to use the scanner without pressing the trigger or holding the wand. Scan the Factory Defaults barcode above to disable the feature.

38 Logicube Omniclone Xi ™ User’s Manual