THE DATABASE/BARCODE OPTION
Scan2- UserEnteredName2 – This is the second line of data collected by the Barcode Scanner (i.e. Batch Number). The entered name needs to be 18 characters or less.
Scan3- UserEnteredName3 – This is the third line of information collected by the Barcode Scanner (i.e. Location Number). The entered name needs to be 18 characters or less.
Time – This records the time that the cloning session completed. The time comes from the
Date – This records the date from the unit’s internal clock.
NOTE: Please refer to “Time/Date Settings” in
Chapter 3: Cloning Modes for more information on how to set the internal clock.
MasterModel – This line records the Model
Number of the Master drive.
MasterSerial – This line records the Serial Number of the Master Drive.
TargetModels – This line records the Model
Number of each Target drive connected to the
TargetSerials - This line records the Serial Number of each Target drive connected to the Omniclone- Xi.
Mode – This line records the Cloning Mode used (i.e. Clever, Mirror, etc.)
Outcome – This records whether or not the cloning session was completed successfully. It will either say PASS or FAIL.
Database.csv
The Logicube DataBase™ option writes all of the collected information to a file named Database.csv. The “csv” extension stands for “comma separated values” and is a common database format. It can be read by most database programs (i.e. Microsoft Excel, Microsoft Access, dBase, etc.). This file is stored on the Compact Flash (CF) drive.
A typical .CSV file opened in a text editor looks something like this:
TEST, Date, MasterModel,
34 | Logicube Omniclone Xi ™ User’s Manual |
