Set Type 
At this level you have an opportunity to reassign or edit the location type you first selected and set the location to either one of the other types or change the data in an existing location.
This option also lets you associate a new Alert Tone to POI. Dangerous Xing and Dangerous Road each have unique Alert Tones that cannot be changed. You can still set a different volume level with the new Alert Tone for all three types.
Set LocationInfo 
Input the latitude and then the longitude.
Set Lockout 
As you near your target location, an alert sounds at 0.5, 0.25, and 0.1 mi. If you hear the first and prefer to not hear any others that occasion, simply press [L/O] to disable the operation while keeping all the data for another time. You can use the menu Lockout option as well. When you set the location system to Temporary L/O and move away more than four miles and then come back again, L/O status is automatically canceled. If you turn off the switch, the scanner is unlocked.
Deleting a Location
If you have programmed a location that you no longer want, you can delete it as follows.
[MENU] Program Location 
Select a location such as Dangerous Xing 
Location to be deleted 
Delete Location 
Confirm Delete? Yes=”E” / No=”.” 
Set Alert Beep 
Choose from Off, no tone sounds or one of the alert melodies Alert 1 to Alert 4.
Once you make a Tone selection you are then asked to assign a volume level to that selection.
Set Alert Volume 
select from 15 sound levels, plus Auto. As you rotate
the Scroll Control the Alert tone you set is played louder and louder. Press 
to select a volume level. You can also select Auto, a level that is the same setting as your master volume control setting.
121
