Setting Site Location Information | Uniden UBCD996T specification

On — You only need to enter control channel frequencies.
Off — You must enter all voice and control channel frequencies.
Note: The scanner defaults to On.
Setting Site Location Information	MESL
[MENU] Program System
Select a trunked system
Edit Site (current)
Select a site
Set LocationInfo

This setting control whether the system is automatically enabled and disabled when you connect a GPS to the scanner.

Set Latitude — Enter the system’s latitude using the format you selected in the system settings.

Set Longitude — Enter the system’s longitude using the format you selected in the system settings.

Set Range — Set the system’s range using the units you selected in the system settings.

Set GPS Enable — Depending on the data received from the GPS, the L/O status of the site is automatically controlled.

Adjust P25 Level			MEL
[MENU] Program System

Select a trunked system

Edit Site (current)

Select a site

Adjust P25 Level

This setting determines some site-specific parameters for digital channels. In most cases, setting this to Auto provides the best performance. However, you can also manually set the digital decode threshold. This setting affects all channels in the current site. See “ Optimizing P25 Performance” on Page52.

82

Image 82

Uniden UBCD996T manual Setting Site Location Information, Adjust P25 Level

Contents

UBCD996T Precautions Earphone Warning Power Related Issues Table of Contents Optimizing P25 Performance Programming Your Scanner Using the Close Call Feature 100 Care and Maintenance 125 This page is intentionally blank This page is intentionally blank Introduction Feature Highlights GeneralPage GPS Priority SearchAuto Store PC Control and Cloning Memory Storage Limits Using the Scroll Control Search Lockout Limits About This Manual Entering Text Within a Menu Option How the Scanner’s Controls Are Represented in This ManualMenu Program System Select the system Page Page Understanding the Scanner’s Memory Understanding Scanning and the UBCD996TUnderstanding Quick Keys What is Searching? What is Scanning?What is CTCSS/DCS? Conventional Scanning Simplex Operation What is Trunk Tracking? Repeater Operation Types of Trunking Systems Trunked ScanningMotorola Trunking Edacs Trunking LTR Trunking Setup/Operation Startup ConfigurationMulti-Site Trunking Call Motorola/EDACS Where To Get More InformationInformation On The Internet Included With Your Scanner Setting Up Your Scanner Base Station UBCD996T Vehicle Installation Setting Up an Audio Recording Device or Computer RecordingMounting Using the Bracket Mounting Using the DIN-E Sleeve Page Mounting Using ISO Technique Removing the Scanner from the DIN-E Sleeve Connecting an Earphone/Headphone Connecting an Optional AntennaRemoving the Display Sticker Connecting an Extension Speaker Controls, Keys, and Functions + Press Srvc Page Srvc Look At The Display Operation Turning On the Scanner and Setting the SquelchStartup Key Operation Scanning Systems Menu Search for… Edit Custom Selecting Systems to Scan Selecting System Channel Groups Locking/Unlocking Systems ID Scan/ID Search ModeLocking/Unlocking Channels Quickly Storing an ID During ID Search Holding On a SystemHolding On a Channel Quick-Storing Channels or Talk Group ID’s Tgid Trunking Activity Indicators Toggling the Display Mode Conventional System Edit Sys Option Adjust P25 LevelOptimizing P25 Performance Trunked SystemPage Using the Menu Setting the Dimmer Programming General SettingsSetting and Using the Backlight Menu Settings Set Backlight Set Dimmer Setting the Audio AGC Adjusting the Key BeepSetting the Backlight Color Setting the GPS Format Setting the Display OrientationAdjusting the Display Contrast Setting the Position Format Setting the Time Zone Setting the Serial Port SpeedSetting the Time Format Setting the Distance Units Viewing Memory Used Displaying Scanner InformationInitializing the Scanner’s Memory Viewing the Firmware Version and Electronic Serial Number Volume/Squelch with PC Control Connecting Your Scanner to a Personal ComputerWired Cloning Restore Preprogram List? Yes=E/No=Page Programming Your Scanner General NotesPage Page Page Programming Conventional Systems Editing the System Name Programming Trunked Radio SystemsMenu Program System New System Editing the System Quick Key Specifying the Correct System TypeProgramming System Options Edit Name Setting the Startup Key Setting the System Lockout Setting Channel Delay Time Setting the System Hold TimeSetting ID Scan/ID Search Setting Data Skip Program System Setting Location InformationSetting the Fleet Map Edit Sys Option Edit Fleet Map Setting End Code Operation Setting the Status BitSetting I-Call Operation Edit Sys Option Emergency Alert Setting the Emergency Alert OptionSetting the Edacs ID Format Set Level Reviewing ID Search Lockouts Setting the System Record OptionClearing All Locked Out ID’s Editing Sites Adjust the P25 Decode ThresholdEditing Channel Groups Copying Systems Setting the Site NameProgramming Sites Deleting Systems Setting the Site Quick Key Menu Program System Select a trunked system Edit Site Setting Site Frequencies Setting the Site Startup KeySet Frequencies New Setting Site Lockout Setting Site ModulationSetting Site Attenuation Set Modulation Setting Site Hold Time Editing the Band Plan VHF and UHF only Edit Band Plan Setting P25 Band PlansSetting Control-Channel Only Mode Except for P25 Edit Site current Setting Site Location Information Adjust P25 Level Editing a Channel Group Name Setting Up a Channel GroupProgramming Channel Groups Deleting Sites Editing Channels Setting the Group Quick KeyLocking Out Channel Groups Editing the Channel Name Alpha Tag Deleting Channel GroupsCreating a Channel Delete Group Confirm Delete? Yes=E / No= Editing the Talk Group ID Editing FrequenciesEdit Frequency Edit Tgid Setting the Audio TypeSelecting CTCSS/DCS Tones Set Audio Type Select from All, Digital Only, Analog Only Quick CTCSS/DCS Save Setting Channel Modulation MethodSet Audio Type Analog Only Setting Channel Priority Setting Channel AttenuationSet Priority Setting Channel Alert Set Alert Deleting a Channel Setting LockoutCopying a Channel Edit Group Edit Channel Searching and Storing Service SearchMenu Search for Service Search Quick Search? Yes=E / No= Menu Search for Custom Search Quick SearchCustom Search Quick Search? Yes=E / No= Press .No then to Custom Search Menu Search for Edit Custom Custom 1, Custom 2 to Custom Editing a Custom Search RangeQuick Search? Yes=E / No= Press .No then to Edit Custom Search With Scan Method One Set Delay TimeEditing a Service Search Method Two Assigning a Search Range to a Search Key Set AttenuatorSet Record Saving a Found Channel Quick Save Conventional Search and Store Auto Search and StoreSelecting a System Menu Search for Search and Store Trunked Search and Store Setting Close Call Options Using the Close Call FeatureMenu Close Call 10/15/30/45/60 sec Close Call Hits Close Call Hits with Scan 103 Search and Close Call Options Managing Locked-Out Frequencies Searching for Subaudible Tones Unlocking All FrequenciesReviewing Locked-Out Frequencies Screening Out Broadcast Sources Finding Repeater Output Frequencies Srch/CloCall Opt Repeater Find On or Off Setting the Maximum Auto Store ValueSetting the Modulation Type Menu Srch/CloCall Opt Max Auto Store Menu Srch/CloCall Opt Set Attenuator Setting AttenuationSetting Data Skip Menu Srch/CloCall Opt Set Data Skip Setting Record Setting the Delay TimeSetting the Search Frequency Step Adjust P25 Level Priority Scan Menu Srch/CloCall Opt Adjust P25 LevelMenu Set Priority Choose Off, On, or Plus On This page is intentionally blank 112 113 Menu Tone-Out for Tone-Out Setup Setting Tone-Out StandbySetting Up Tone-Out Fire Tone-Out 115 Tone-Out Multi-Channel Monitoring GPS Compatibility Connecting Your Scanner to a GPS DeviceLocation-Based GPS Scanning Initial GPS Operation 118 Non-Radio Location Based GPS Features Menu Program Location Setting the OptionsNew Location Deleting a Location Delete Location GPS Display Mode GPS Review Location Mode 124 General Use Care and MaintenanceCleaning Location Troubleshooting 127 128 Specifications Frequency Range MHz NFM 131 Preset Fleet Maps Reference 133 User Defined Fleet Maps Type I Programming Information Size Code Restrictions 136 137 138 139 Index LTR CTCSS/DCS 143 Parts Covered 145 Memo 147