Manuals / Uniden / Computer Equipment / Scanner

Uniden UBCD996T manual Quick CTCSS/DCS Save, Setting Channel Modulation Method

Models: UBCD996T

1 148

Download 148 pages 16.69 Kb

Page 88

Set Audio Type

Analog Only

At this point you can scroll to CTCSS or DCS and select the subaudible frequency in the CTCSS range or the DCS code.

Off — any signal opens squelch. The default setting is Off.

Search — the scanner searches for and displays any CTCSS or DCS tone that accompanies the transmission.

CTCSS — the scanner only opens squelch if the CTCSS tone you select is also present with the signal. The scanner then prompts you to enter or scroll to the desired tone.

DCS — the scanner only opens squelch if the DCS tone you select is also present with the signal. The scanner then prompts you to enter or scroll to the desired tone.

Set Lockout — the scanner does not stop on the channel if the tone you select is present. The scanner prompts you to select a CTCSS or DCS tone.

Note: The scanner does not detect or decode a P25 digital signal if the channel or search has CTCSS/DCS search turned on.

Quick CTCSS/DCS Save

If you set a channel to CTCSS/DCS Search and the scanner detects a tone, when you press [EYES], the first option is Set found CTCSS/DCS?

Setting Channel Modulation Method	C
[MENU] Program System
Select the conventional system

Edit Group

Select a channel group

Edit Channel

Select the Channel

Set Modulation

88

Image 88

Uniden UBCD996T manual Quick CTCSS/DCS Save, Setting Channel Modulation Method, Set Audio Type Analog Only

Contents

UBCD996T Precautions Earphone WarningPower Related Issues Table of Contents Optimizing P25 Performance Programming Your Scanner Using the Close Call Feature 100 Care and Maintenance 125 This page is intentionally blank This page is intentionally blank Introduction Feature Highlights GeneralPage GPS Search Auto StorePriority PC Control and CloningMemory Storage Limits Using the Scroll Control Search Lockout Limits About This ManualEntering Text Within a Menu Option How the Scanner’s Controls Are Represented in This ManualMenu Program System Select the system Page Page Understanding the Scanner’s Memory Understanding Scanning and the UBCD996TUnderstanding Quick Keys What is Searching? What is Scanning?What is CTCSS/DCS? Conventional Scanning Simplex OperationWhat is Trunk Tracking? Repeater OperationTypes of Trunking Systems Trunked ScanningMotorola Trunking Edacs Trunking LTR Trunking Setup/Operation Startup ConfigurationMulti-Site Trunking Call Motorola/EDACS Where To Get More InformationInformation On The Internet Included With Your Scanner Setting Up Your Scanner Base StationUBCD996T Vehicle Installation Setting Up an Audio Recording Device or Computer RecordingMounting Using the Bracket Mounting Using the DIN-E Sleeve Page Mounting Using ISO Technique Removing the Scanner from the DIN-E SleeveConnecting an Earphone/Headphone Connecting an Optional AntennaRemoving the Display Sticker Connecting an Extension Speaker Controls, Keys, and Functions + Press Srvc Page Srvc Look At The Display Operation Turning On the Scanner and Setting the SquelchStartup Key Operation Scanning Systems Menu Search for… Edit CustomSelecting Systems to Scan Selecting System Channel GroupsLocking/Unlocking Systems ID Scan/ID Search ModeLocking/Unlocking Channels Holding On a System Holding On a ChannelQuickly Storing an ID During ID Search Quick-Storing Channels or Talk Group ID’s TgidTrunking Activity Indicators Toggling the Display Mode Edit Sys Option Adjust P25 Level Optimizing P25 PerformanceConventional System Trunked SystemPage Using the Menu Programming General Settings Setting and Using the BacklightSetting the Dimmer Menu Settings Set Backlight Set DimmerSetting the Audio AGC Adjusting the Key BeepSetting the Backlight Color Setting the Display Orientation Adjusting the Display ContrastSetting the GPS Format Setting the Position FormatSetting the Serial Port Speed Setting the Time FormatSetting the Time Zone Setting the Distance UnitsDisplaying Scanner Information Initializing the Scanner’s MemoryViewing Memory Used Viewing the Firmware Version and Electronic Serial NumberConnecting Your Scanner to a Personal Computer Wired CloningVolume/Squelch with PC Control Restore Preprogram List? Yes=E/No=Page Programming Your Scanner General NotesPage Page Page Programming Conventional Systems Editing the System Name Programming Trunked Radio SystemsMenu Program System New System Specifying the Correct System Type Programming System OptionsEditing the System Quick Key Edit NameSetting the Startup Key Setting the System LockoutSetting the System Hold Time Setting ID Scan/ID SearchSetting Channel Delay Time Setting Data SkipSetting Location Information Setting the Fleet MapProgram System Edit Sys Option Edit Fleet MapSetting End Code Operation Setting the Status BitSetting I-Call Operation Setting the Emergency Alert Option Setting the Edacs ID FormatEdit Sys Option Emergency Alert Set LevelReviewing ID Search Lockouts Setting the System Record OptionClearing All Locked Out ID’s Editing Sites Adjust the P25 Decode ThresholdEditing Channel Groups Setting the Site Name Programming SitesCopying Systems Deleting SystemsSetting the Site Quick Key Menu Program System Select a trunked system Edit SiteSetting Site Frequencies Setting the Site Startup KeySet Frequencies New Setting Site Modulation Setting Site AttenuationSetting Site Lockout Set ModulationSetting Site Hold Time Editing the Band Plan VHF and UHF onlySetting P25 Band Plans Setting Control-Channel Only Mode Except for P25Edit Band Plan Edit Site currentSetting Site Location Information Adjust P25 LevelSetting Up a Channel Group Programming Channel GroupsEditing a Channel Group Name Deleting SitesEditing Channels Setting the Group Quick KeyLocking Out Channel Groups Deleting Channel Groups Creating a ChannelEditing the Channel Name Alpha Tag Delete Group Confirm Delete? Yes=E / No=Editing the Talk Group ID Editing FrequenciesEdit Frequency Setting the Audio Type Selecting CTCSS/DCS TonesEdit Tgid Set Audio Type Select from All, Digital Only, Analog OnlyQuick CTCSS/DCS Save Setting Channel Modulation MethodSet Audio Type Analog Only Setting Channel Priority Setting Channel AttenuationSet Priority Setting Channel Alert Set AlertSetting Lockout Copying a ChannelDeleting a Channel Edit Group Edit ChannelService Search Menu Search for Service SearchSearching and Storing Quick Search? Yes=E / No=Quick Search Custom SearchMenu Search for Custom Search Quick Search? Yes=E / No= Press .No then to Custom SearchMenu Search for Edit Custom Custom 1, Custom 2 to Custom Editing a Custom Search RangeQuick Search? Yes=E / No= Press .No then to Edit Custom Search With Scan Set Delay Time Editing a Service SearchMethod One Method TwoSet Attenuator Set RecordAssigning a Search Range to a Search Key Saving a Found Channel Quick SaveAuto Search and Store Selecting a SystemConventional Search and Store Menu Search for Search and StoreTrunked Search and Store Setting Close Call Options Using the Close Call FeatureMenu Close Call 10/15/30/45/60 sec Close Call Hits Close Call Hits with Scan103 Search and Close Call Options Managing Locked-Out FrequenciesUnlocking All Frequencies Reviewing Locked-Out FrequenciesSearching for Subaudible Tones Screening Out Broadcast SourcesFinding Repeater Output Frequencies Srch/CloCall OptSetting the Maximum Auto Store Value Setting the Modulation TypeRepeater Find On or Off Menu Srch/CloCall Opt Max Auto StoreSetting Attenuation Setting Data SkipMenu Srch/CloCall Opt Set Attenuator Menu Srch/CloCall Opt Set Data SkipSetting the Delay Time Setting the Search Frequency StepSetting Record Adjust P25 LevelPriority Scan Menu Srch/CloCall Opt Adjust P25 LevelMenu Set Priority Choose Off, On, or Plus On This page is intentionally blank 112 113 Setting Tone-Out Standby Setting Up Tone-OutMenu Tone-Out for Tone-Out Setup Fire Tone-Out115 Tone-Out Multi-Channel Monitoring Connecting Your Scanner to a GPS Device Location-Based GPS ScanningGPS Compatibility Initial GPS Operation118 Non-Radio Location Based GPS Features Menu Program Location Setting the OptionsNew Location Deleting a Location Delete LocationGPS Display Mode GPS Review Location Mode 124 Care and Maintenance CleaningGeneral Use LocationTroubleshooting 127 128 Specifications Frequency Range MHzNFM 131 Preset Fleet Maps Reference133 User Defined Fleet Maps Type I Programming InformationSize Code Restrictions 136 137 138 139 Index LTR CTCSS/DCS 143 Parts Covered 145 Memo 147