Toshiba VF-A7 instruction manual ［Output terminal function setting 1/2］

J-26

［Output terminal function setting (1/2)］			Sensorless vector/vector with sensor（●: valid,－: invalid）
Positive	Negative	Function		Speed	Torque	Position	V/f	Reference
logic	logic			control	control	control	constant	section
0	1	Lower limit frequency()		●/●	●/●	－/●	●
2	3	Upper limit frequency()		●/●	●/●	－/●	●
4	5	Low speed signal		●/●	●/●	－/●	●
6	7	Acceleration/deceleration completion		●/●	－	－	●
8	9	Specified speed arrival		●/●	●/●	－/●	●
10	11	Failure FL (all trip)		●/●	●/●	－/●	●
12	13	Failure FL (except for  and )		●/●	●/●	－/●	●
14	15	Over-current pre-alarm		●/●	●/●	－/●	●
16	17	Inverter overload pre-alarm		●/●	●/●	－/●	●
18	19	Motor overload pre-alarm		●/●	●/●	－/●	●
20	21	Overheat pre-alarm		●/●	●/●	－/●	●
22	23	Over-voltage pre-alarm		●/●	●/●	－/●	●
24	25	Main circuit under-voltage () detected		●/●	●/●	－/●	●
26	27	Low current detected		●/●	●/●	－/●	●
28	29	Over-torque detected		●/●	●/●	－/●	●
30	31	Braking resistor overload () pre-alarm		●/●	●/●	－/●	●	7.2.2
32	33	In emergency stop		●/●	●/●	－/●	●
34	35	In course of retry		●/●	●/●	－/●	●
36	37	Pattern run switching output		●/●	－	－	●
38	39	PID deviation limit		●/●	－	－	●
40	41	Run/stop		●/●	●/●	－/●	●
42	43	Serious failure (, , , phase failure, etc.)		●/●	●/●	－/●	●
44	45	Light failure (, , , , )		●/●	●/●	－/●	●
46	47	Commercial/INV switching output #1(for inverter operation output)		●/●	－	－	●
48	49	Commercial/INV switching output #2(for commercial operation output)		●/●	－	－	●
50	51	Cooling fan ON/OFF		●/●	●/●	－/●	●
52	53	In Jog run		●/●	－	－	●
54	55	Panel operation/terminal board operation switching		●/●	●/●	－/●	●
56	57	Cumulative operation time alarm		●/●	●/●	－/●	●
58	59	Abnormal communication alarm #1 (caused by scanning)		●/●	●/●	－/●	●
60	61	Forward/reverse switching		●/●	●/●	－/●	●
62	63	Ready for operation #1		●/●	●/●	－/●	●