Toshiba VF-A7 Input Function Electrical Inverter internal, 5Vdc10Vdc-1mA full-scale voltmeter

Terminal	Input /	Function	Electrical		Inverter internal
symbol	output		specification			circuit
		Multifunction programmable analog output. Factory
			1mA full-scale dc
FM	Output	default setting: Operation frequency command.	ammeter	or		0.01μ
		Connect a 1mAdc full-scale ammeter or a	7.5Vdc-1mA full-			100k 18k
		7.5Vdc(10Vdc)-1mA full-scale voltmeter.	scale dc voltmeter		4.7k
		Multifunction programmable analog output. Factory	1mA full-scale	dc	0.1μ	10k	470p
						33k
						0.01μ
AM	Output	default setting: Output current. Connect a 1mAdc	ammeter	or		15k
		full-scale ammeter or a 7.5Vdc(10Vdc)-1mA full-	7.5Vdc-1mA full-
		scale voltmeter.	scale dc voltmeter

		P24
		P5
Multifunction open collector output. This terminal
FP Output outputs pulses at 1.00 kHz to 43.20 kHz. Factory	Max. 50 mA	3.9k
default setting: 3.84kHz.		10k

CCCommon Common terminal of the control circuit. to I/O

P24 Output		24Vdc power output (power for control of the	24VDC-100mA		FUSE			P24
		inverter).
							68k
					0.1μ
OUT1		Multifunction programmable open collector output.	Open collector				P5
		The terminal has been set by default so as to detect	output:			FUSE
									150
		and output low-speed signal output frequencies.	24Vdc-50mA
				10 10
	Output	Multifunction programmable open collector output.	*Sink logic/
OUT2		The terminal has been set by default so as to detect	source logic
		and outputs signals indicating the completion of	switchable
		acceleration/ deceleration.

		Relay contact output.		Contact rating: 250 Vac = -2	250Vac-2A	P24
		A (cosφ= 1), 30 Vdc-1 A and 250 Vac-1A (cosφ =				FLA
FLA		0.4).	Used to detect the activation of the inverter's		30Vdc-1A	FLB
						FL
FLB	Output	protective function. If		the protective function is	:resistor load	FLC
FLC		activated, FLA-FLC circuit is closed, while FLB-FLC			250Vac-1A	10k
		circuit is opened .			:cosφ=0.4	10k

B-9