Toshiba VF-A7 Speed/torque reference gain/bias setup #22/2, Secondary acceleration/deceleration

[25] Speed/torque reference gain/bias setup #2(2/2) * Minimum setup unit is 0.1 in case of 16-bit access. Sensorless vector/vector with sensor (●:valid, －:invalid)

Title	Communi	Function	Adjustment range	Min. unit (panel/	Default	Write during
	cation No			communication)	setting	running
	0483	Modulation rate control	80.0～300.0 [%]	0.1/0.01	105.0	Enabled
		margin (voltage control)
	0484	Modulation rate control	80.0～300.0 [%]	0.1/0.01	105.0	Enabled
		margin (V/f control)
	0485	Stall cooperation gain at field	0～255	1/1	128	Enabled
		weakening zone
	0486	Exciting starting rate	1.64～327.6	0.01/0.01	163.8	Enabled
	0487	Compensation coefficient for iron loss	0～255	1/1	10	Enabled
	0488	Voltage compensation	0.00～327.6	0.01/0.01	See J-28	Enabled
		coefficient for dead time
	0489	Dead time compensation	0: Enabled, 1: Disabled	－	0	Enabled
	0490	Dead time compensation (bias time)	-32.7～32.7	0.01/0.001	0.00	Enabled
	0491	Current / voltage control	10.0～60.0 [Hz]	0.1/0.01	40.0	Enabled
		switching frequency

Vector control			V/f	Reference
Speed	Torque	Position
			Constant	section
control	control	control
●／―	―	―	－	－
―	―	―	●	－
●／●	●／●	―／●	●	－
●／●	●／●	―／●	―	－
●／●	●／●	―／●	―	－
●／●	●／●	―／●	●	－
●／●	●／●	―／●	●	－
●／●	●／●	―／●	●	－
●／―	―	―	―	－

J-14

[26] Secondary acceleration/deceleration

Title	Communi	Function	Adjustment range	Min. unit (panel/	Default	Write during	Vector control			V/f	Reference
							Speed	Torque	Position
	cation No			communication)	setting	running	control	control	control	Constant	section
	0500	Acceleration time #2	0.1()～6000 [s]	0.01/0.01*	See J-28	Enabled	●/●	－	－	●	6.23.2
	0501	Deceleration time #2	0.1()～6000 [s]	0.01/0.01*	See J-28	Enabled	●/●	－	－	●	6.23.2
	0502	Acceleration/deceleration pattern #1	0: Linear, 1: S-pattern #1, 2: S-pattern #2	－	0	Enabled	●/●	－	－	●	6.23.1
	0503	Acceleration/deceleration pattern #2	0: Linear, 1: S-pattern #1, 2: S-pattern #2	－	0	Enabled	●/●	－	－	●	6.23.2
		Acceleration/deceleration	1: Acceleration/deceleration #1
	0504		2: Acceleration/deceleration #2	－	1	Enabled	●/●	－	－	●	6.23.2
		#1,2,3,4 selection	3: Acceleration/deceleration #3
			4: Acceleration/deceleration #4
	0505	Acc/dec switching frequency #1	0.0～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.23.2
	0506	S-pattern lower-limit adjustment amount	0～50 [%]	1/0.01	25	Enabled	●/●	－	－	●	6.23.1
	0507	S-pattern upper-limit adjustment amount	0～50 [%]	1/0.01	25	Enabled	●/●	－	－	●
	0508	Acc/dec time lower limit	0.01～10.00 [s]	0.01/0.01*	0.10	Enabled	●/●	－	－	●	6.23.3
	0510	Acceleration time #3	0.1()～6000 [s]	0.01/0.01*	See J-28	Enabled	●/●	－	－	●	6.23.2
	0511	Deceleration time #3	0.1()～6000 [s]	0.01/0.01*	See J-28	Enabled	●/●	－	－	●	6.23.2
	0512	Acceleration/deceleration pattern #3	0: Linear, 1: S-pattern #1, 2: S-pattern #2	－	0	Enabled	●/●	－	－	●	6.23.2
	0513	Acc/dec switching frequency #2	0.0～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.23.2
	0514	Acceleration time #4	0.1()～6000 [s]	0.01/0.01*	See J-28	Enabled	●/●	－	－	●	6.23.2
	0515	Deceleration time #4	0.1()～6000 [s]	0.01/0.01*	See J-28	Enabled	●/●	－	－	●	6.23.2
	0516	Acceleration/deceleration pattern #4	0: Linear, 1: S-pattern #1, 2: S-pattern #2	－	0	Enabled	●/●	－	－	●	6.23.2
	0517	Acc/dec switching frequency #3	0.0～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.23.2

※(Reference section): Refer to the inverter's individual manual.