Samsung HT-BD8200T/XEF manual Audio setup, Setting UP the Speaker Options, AV Sync, Audio Setup

Audio setup

SETTING UP THE SPEAKER OPTIONS

Dynamic Compression
This is only active when a Dolby Digital signal is detected.
		Music
• On : When Movie soundtracks are played at low volume or			System
			Language
from smaller speakers, the system can apply appropriate		Photo
	DVD	Setup Audio		◄	Dynamic Compression : On On			►
							Off
compression to make low-level content more intelligible and			Display		AV Sync	:	50msec
			HDMI		Test Tone
prevent dramatic passages from getting too loud.			Network		Speaker Distance

• Off : You can enjoy the movie with the standard Dynamic	Parental
	Sound Edit
Range.

AV Sync

ENG

● AUDIO SETUP

Video may look slower than the audio when the player is

connected to a digital TV. If this occurs, adjust the audio

delay time to match the video.

•You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

Setting the Test Tone

	Music	System
	Photo
		Language		Dynamic Compression : On
DVD	Setup	Audio	◄	AV Sync	:	50msec0msec
		Display		Test Tone		25msec
		HDMI		Speaker Distance		50msec

Network	Sound Edit	75msec
Parental		100msec
		125msec

Use the Test Tone feature to check the speaker connections.

1.	With the unit in Stop mode, press the MENU button.		Music
			System
			Photo
2.	Press the ▲▼◄► buttons to select Setup, then press the		Language
		DVD	Setup Audio	◄	Dynamic Compression : On		►
	ENTER or ► button.		Display		AV Sync	: 50msec
			HDMI		Test Tone
3.	Press the ▲▼ buttons to select Audio, then press the		Network		Speaker Distance
			Parental

ENTER or ► button.

Sound Edit

•Audio setup menu will be displayed.

4.Press the ▲▼ buttons to select Test Tone, then press the ENTER or ► button.

5.Press the RED(A) button

•A test tone will be sent to L R LFE in order so you can make sure the speakers are set up correctly.

6.To end the test tone, press the RED (A) button again.

	Music	System		Dynamic Compression : On
	Photo
		Language		AV Sync	: 50msec
DVD	Setup	Audio	◄	Test Tone	►
		Display		Speaker Distance
		HDMI		Sound Edit
		Network
		Parental

M Press the RETURN button to return to the previous menu.

When playing a BD/DVD or CD, this will work only in Stop mode.

Use this function to check that each speaker is correctly connected and that there is no problem.

When HDMI AUDIO is on (audio is produced through TV speakers), the TEST TONE function is not available.

37