Setting UP the Network Setup Options, Cable Network

SETTING UP THE NETWORK SETUP OPTIONS

To obtain information on the proper settings, check the network settings on your computer or contact your Internet provider.

To set the network of your Blu-ray Home Cinema, follow the steps below.

1.With the unit in Stop mode/No Disc mode, press the

MENU button.		Music	Display
		Photo	Display
		Photo	HDMI
2. Press the ▲▼◄► buttons to select Setup, then press	DVD	Setup	Network ◄

Parental

the ENTER or ► button.

3.Press the ▲▼ buttons to select Network, then press the ENTER or ► button.

4.Press the ▲▼ buttons to select the desired network option from the options described below, then press the ENTER or ► button.

5.Press the ▲▼ buttons to select the desired item, then press the ENTER button. Each network option is described in detail below.

Select Cable or Wireless as the method to connect to the

Music

network. Photo Display

HDMI

To setup, follow steps 1~3 above.	DVD	Setup Network	◄ Network Selection : Cable ►
4. Press the ▲▼ buttons to select Network Selection, then		Parental	Cable Network
4. Press the ▲▼ buttons to select Network Selection, then			Wireless Network
press the ENTER or ► button.			Proxy
press the ENTER or ► button.			NTP Server	: Off
• Cable : Select this to connect to the network using a			Network Connection Test
• Cable : Select this to connect to the network using a			BD-LIVE	: Allow (Valid Only)
cable. (see page 28)			Connection
cable. (see page 28)

•Wireless : Select this to connect to the network wirelessly. (see page 29)

ENG

To setup, follow steps 1~3 above.

4.Press the ▲▼ buttons to select Cable Network, then press the ENTER or ► button.

5.Press the ▲▼ buttons to select DHCP, then press the ENTER button.

M If DHCP is set to On, you can't select IP Address, Subnet Mask or Gateway.

If DNS is set to Auto, you can’t select Primary/ Secondary DNS.

Select		Return