![](/images/new-backgrounds/1332381/33238129x1.webp)
Work Piece and Work Area Set Up
1.Designate a work area that is clean and
2.Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to al- low free movement while working.
3.Secure loose work pieces using a vise or clamps (not included) to pre- vent movement while working.
4.There must not be hazardous ob- jects, such as utility lines or foreign objects, nearby that will present a hazard while working.
5.You must use personal safety equip- ment including, but not limited to,
6.Before beginning work, provide for sparks and debris that will fly off the work surface.
General Operating Instructions
To prevent serious injury:
Grip the tool firmly in both hands.
1.This tool has a
2.Allow the tool to come up to full speed before touching the work ma- terial.
3.Apply the wheel to the work mate- rial, allowing the tool to operate at full speed. If the tool bogs down, use lighter pressure.
4.To create a smoother surface, keep the tool moving over the work sur- face.
5.Release the Trigger Switch to stop the tool.
6.Allow the tool to come to a complete stop before setting it down.
7.To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool in- doors out of children’s reach.
SKU 97588 | For technical questions, please call | Page 15 |