4.3.3SEG Setup Menu
1.To change the IP address you should select option 0 server Configuration. A 3 digit number will be displayed in brackets. This is the first 'octet' of the current IP address of this SEG device. You will either enter a new 3 digit number and then press enter to accept it, or you can accept this number by pressing enter. You will do this for all 4 octets.
2.You must now press <ENTER> for the rest of the options to accept the default settings.
3.There is no need to change any other settings within this setup menu.
4.From the main menu, select 9 save and exit.
5.When you receive the Parameters stored ... message you can exit this utility by selecting File > Exit. You will select Yes if you are asked if you want to disconnect.
NOTE: Default values in all other menu systems should. The default value is kept by pressing the <ENTER> key when that setting is displayed.
Page 24 of 34 | Document Number: 6066005, Rev 3.2 |
