Table of Contents |
| |
Section 1: Introduction | 1 | |
Section 2: Product Overview | 3 | |
2.1 | Product Specifications | 3 |
2.2 | LED Status | 3 |
Section 3: Hardware Installation | 4 | |
3.1 | 4 | |
3.2 | Connection the | 5 |
3.2.1 | 5 | |
3.2.2 | 5 | |
3.3 | Connecting the | 6 |
3.3.1 | 6 | |
3.3.2 | 6 | |
3.4 | Connecting Multiple HubMax/Hub MiniMax Networks | 7 |
3.5 | Connecting the | 8 |
3.5.1 | 8 | |
3.5.2 | 8 | |
3.6 | Connecting Multiple prox.pad plus Networks | 9 |
3.7 | Connecting the | 10 |
3.8 | Connecting the | 11 |
3.9 | 12 | |
3.9.1 | 12 | |
3.9.2 | 13 | |
3.9.3 | 13 | |
3.9.4 Connecting the | 14 | |
3.9.5 Connecting the | 14 | |
3.9.6 Connecting the | 15 | |
3.9.7 Connecting the | 16 | |
Section 4: SEG Configuration | 17 | |
4.1 | Dynamic IP Address via DHCP server, IP Address in SEG can change | 17 |
4.2 | Dynamic IP Address, | 20 |
4.3 | Static IP Address | 21 |
4.3.1 Setting a Static IP Address of a SEG through a serial connection (via PC com port) | 21 | |
4.3.2 Setting a Static IP Address of a SEG via LAN (through a Telnet connection) | 22 | |
4.3.3 SEG Setup Menu | 24 | |
4.3.4 Configuring the IP Address in Hub Manager Professional | 27 | |
4.4 | SEG Parameters | 27 |
4.4.1 IP Address | 27 | |
4.4.2 IP Port | 27 | |
4.4.3 SEG Serial Net Number | 27 | |
4.4.4 Security Key | 27 | |
4.4.5 Generate Random Security Key | 28 | |
4.4.6 Generate Default Security Key | 28 | |
4.4.7 Set This Security Key into the SEG | 28 | |
4.5 | Defaulting the SEG Settings | 28 |
4.5.1 Reset the Security Key in the SEG to all 0's | 28 | |
4.5.2 Reset the Security Key in the SEG to all 0's | 29 | |
4.5.3 Reset the Security Key in the PC to all 0's | 29 | |
Section 5: Trouble Shooting | 30 | |
Section 6: FCC Compliance Statement | 33 | |
Page 2 of 34 | Document Number: 6066005, Rev 3.2 |
