Audio setup
1 Press OPTIONS.
[ General Setup ] menu is displayed.
2 Press V to select 
[ Audio Setup ], then press B.
3 Select an option, then press OK.
Audio Setup
HDMI Audio |
Audio Sync |
Night Mode |
CD Upsampling |
•See the explanations of the above options in the following pages.
4 Select a setting, then press OK.
•To return to the previous menu, press BACK.
•To exit the menu, press OPTIONS.
[ HDMI Audio ]
When you connect this unit and TV with HDMI cable, select the audio output setting for this connection.
•[ On ] – the sound is output through both your TV and this speaker system. If the audio format on the disc is not supported, it will be downmixed to
•[ Off ] – disable audio output from your TV. The sound is only output through this speaker system.
[ Audio Sync ]
Set the default delay time for audio output when you play a video disc.
1.To start, press OK.
2.Press b B to set the delay time.
3.Press OK to confirm and exit.
[ Night Mode ]
Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
Note
•This setting is only applicable to Dolby Digital encoded DVD.
•[ On ] – for quiet viewing at night (DVDs only).
•[ Off ] – enjoy surround sound with a full dynamic range.
[ CD Upsampling ]
Convert the music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality.
•[ Off ] – turn off
•[ On ] – convert the sampling rate of the CDs twice as high as the original rate.
30EN
