Setting up the Ad Hoc Mode, „ Select network type | Toshiba GN-1060

1 SETTING UP WIRELESS NETWORK

Setting up the Ad Hoc Mode

The wireless settings can be operated from the Control Panel of this equipment.

When setting up the equipment for the wireless network in the Infrastructure Mode, follow the steps below. 1. Select the network type

P.32 “Select network type”

2. Specify the SSID

P.35 “Specify SSID”

3. Select the security mode

P.37 “Select security mode”

Select network type

First access the WIRELESS SETTING screen from the ADMIN menu from the Touch Panel Display to select the network type for the wireless network.

If you are not sure what network type to select, see the following section to determine the network type first. P.10 “Determine the network type”

1

2

3

Press [USER FUNCTIONS] button on the control panel to enter the User Functions menu.

Press [ADMIN].

The ADMINISTRATOR PASSWORD screen is displayed.

Press [PASSWORD].

The input screen is displayed.

4 Enter the administrator password and press [OK].

The ADMIN menu is displayed.

32 Setting up the Ad Hoc Mode

Image 34

Toshiba GN-1060 manual Setting up the Ad Hoc Mode, „ Select network type

Contents

Operators Manual for Wireless LAN Module Page ‰ Model and series names in this manual „ How to read this manual ‰ Symbols in this manualPreface ‰ Options ‰ Trademarks „ About Toshiba Wireless Solution Precautions„ Precautions for Use ‰ Wireless Interoperability ‰ Europe EU Declaration of Conformity ‰ Regulatory Information‰ Canada Industry Canada IC EN 300 ‰ USA-Federal Communications Commission FCC Labelling ‰ Regulatory Notice for Channel Use in France „ Notes Contents Contents Setting up the Ad Hoc Mode Before Setting Up Wireless NetworkSetting Up the Infrastructure Mode Disabling Wireless Network Infrastructure Mode Before Setting Up Wireless Network„ Planning for installation Ad Hoc Mode ‰ Determine the Ssid ‰ Determine the security modeWPA/WPA2/802.1X WEP Enter the administrator password and press OK Setting Up the Infrastructure ModePress Password „ Select network type Press Wireless Setting Press on and press Next Setting Up the Infrastructure Mode ‰ Selecting the Ssid from the available network list „ Specify SsidPress Available Network ‰ Entering the Ssid manually Press Ssid Screen returns to the Ssid Settings screen Press WPA, WPA2 or 802.1X, and then Next „ Select security modePress EAP-TLS and press Next Press Disable and press EAP User Name Press Next Specify the following items and press Next Encryption Between AP and STA Confirm the settings and press Finish Press YES, and wait until the setting is reflected ‰ Selecting WPA/WPA2/802.1X security mode with Peap protocol Press Peap and press Next Enter the following items and press Next EAP User Name Confirm the settings and press Finish ‰ Selecting WPAPSK/WPA2PSK security mode Press Wpapsk or WPA2PSK and press Next Specify the following items and press Next ‰ Selecting WEP security mode Press WEP button and press Next Specify the following items and press Next ‰ Selecting no security mode Press None and press Next Press YES, and wait until the setting is reflected Setting up the Ad Hoc Mode Wireless Setting screen is displayed Press AD HOC and press Next „ Specify Ssid Wireless LAN Security Settings screen is displayed Press WEP and press Next Select the transmit power and press Next Select the transmit power and press Next button Confirm the settings and press Finish button Press YES, and wait until the setting is reflected Disabling Wireless Network Press Password button Press OFF and press Next Specification Troubleshooting Glossary Appendix Specification Description When Error Messages are Displayed TroubleshootingWhen Cannot Connect to Toshiba MFP Glossary Index Numerics Index GN-1060 OME100082C0 GN-1060